No products in the cart.
Supmea Automation Co., Ltd mengkhususkan diri dalam solusi otomatisasi proses, menawarkan flowmeter, pemancar tekanan, instrumen analisis cairan, dan perangkat pengukuran industri lainnya. Produk mereka digunakan di berbagai industri seperti pengolahan air, makanan dan minuman, serta pertambangan. Perusahaan ini menyediakan layanan global dan mempertahankan standar manufaktur yang tinggi.
Supmea
Showing 1–20 of 25 results
- Water Quality Sensors
Conductivity meter SUP-TDS210-B
SUP-TDS210-B conductivity meter with different electrodes can be well adapted to on-site measurement.
Whether it is common tap water, boiler feed water, pure water, ultra-pure water, industrial water, sewage, etc.Features
-Using (4 ~ 20mA) is transmission output isolation, less affected by interference.
-Using isolated RS485 communication, via Modbus-RTU protocol can be easily linked into a computer.
-With configuration temperature manual and automatic compensation functions.
-Has the function of setting high and low alarms and hysteresis.
-It has the function of setting buzzer and LCD backlight switch.
-Has the function of setting high and low alarms and hysteresis.
-It has the function of setting buzzer and LCD backlight switch.SKU: SUP-TDS210-B - Power Meter Transducers
Current voltage input isolator SUP-602S
This product is intelligently designed, and uses many advanced technologies such as digital adjustment, no potentiometer, and automatic zero point calibration.
It can be used in conjunction with various instruments, DCS, PLC and other equipment, and has a wide range of applications in major projects in the petroleum, petrochemical, manufacturing, electric power, metallurgical and other industries.Features
1. Patented power supply voltage retaining wall technology to achieve high isolation between power input and output
2. Dedicated EMC devices with property rights to achieve high anti-interference signal input and output
3. Adopt brand-new imported chips to improve energy efficiency and achieve ultra-low power consumption
4. 0.1% high precision to protect back-end equipment
5. Adopt brand new imported terminals, each terminal can be plugged and unplugged under power
6. Response speed =0.5s
7. With HART protocolSKU: SUP-602S - Pressure Sensors
Digital display pressure transmitter SUP-PX300
The SUP-PX300 digital pressure transmitter uses a diffused silicon pressure core as a sensitive element, and a built-in processing circuit converts the sensor’s millivolt signal into standard voltage and current signal output.
At the same time, it has a display function, which can quickly and intuitively display the scene.
Pressure fluctuations can reduce interference and errors caused by signal transmission.
It is widely used in supporting industrial automation equipment and control fields such as petroleum, chemical industry, metallurgy, electric power and so on.Features
-Small structure and easy installation.
-Advanced diaphragm / oil-filled isolation technology.
-High stability and high reliability.
-Anti- vibration and anti-radio frequency interference.
-316L stainless steel isolation diaphragm structure.
-High- precision, all-stainless steel structure.
-Micro amplifier, voltage, current, RS485 signal output.
-Strong anti-interference and good long-term stability.
-Diversified forms and structures, easy to install and use.
-Wide range, can measure absolute pressure, gauge pressure and sealing reference pressure.SKU: SUP-PX300 - Pressure Sensors
Digital pressure gauge SUP-Y290
Digital pressure gauge, built-in high-precision pressure sensor, can accurately display the pressure in real time, and has the characteristics of high accuracy and long-term stability.
Equipped with a segment LCD display, with multiple functions of resetting, backlighting, switching on and off, and unit switching, easy to operate and easy to install.
This product uses high-quality 304 stainless steel shell and joints, good shock resistance, can measure gas, water, oil and other stainless steel non-corrosive media, suitable for portable pressure measurement, equipment matching, calibration equipment and other pressure measurement applications.Features
-One -key reset, easy to use.
-High- quality 304 stainless steel shell and joints are shock-resistant and durable.
-A variety of measurement units, one-key switch, use more worry-free.
-With temperature compensation, the temperature drift coefficient is small, and the measurement is more accurate.
-The maximum 1.1 times range overload display, and the peak value record function, the use is more reliable.
-Four- digit half-segment display, accurate and intuitive readings.
-The battery power is graphically displayed, and the pressure value percentage meter bar graph display.
-White backlight, easy to view at night.
-This product uses 2 Section . 7 No. ( the AAA ) batteries.SKU: SUP-Y290 - Power Meter Transducers
Distribution type signal isolator SUP-502H
SUP-502H series of signal isolators, voltage and current isolators transmit DC voltage or current signals through isolation, and convert them into required signals to other instruments. It can be used in conjunction with unit combination instruments and DCS, PLC and other systems to provide field instrument signal isolation, signal conversion, signal distribution, signal processing, etc.
So as to improve the anti-interference ability of the automatic control system of the industrial production process, and ensure the stability and stability of the system. reliability. This product is divided into one-in-one-out, one-in-two-out, two-in and two-out, and the input and output are magnetically isolated, and it is widely used in various industrial occasions such as power distribution cabinets and isolation boxes.SKU: SUP-502H - Flow Meter Electromagnetic
Electromagnetic Flow Meter Remote Type
Electromagnetic Flowmeter SUP-LDG Remote adalah Flowmeter Elektromagnetik untuk mengukur aliran cairan konduktif, yang banyak digunakan dalam pasokan air, pengukuran air limbah, pengukuran kimia industri, dll. Jenis jarak jauh ( Remote ) dengan kelas perlindungan IP68 dan dapat dipasang di lokasi yang berbeda untuk transmitter dan konverter dengan Sinyal keluaran Pulse, 4-20mA atau dengan komunikasi RS485.
SKU: SUP-LDG-R - Flow Meter Electromagnetic
Electromagnetic Flow Meter SUP
Electromagnetic Flow Meter SUP-LDG adalah Pengukur Aliran Elektromagnetik untuk semua cairan konduktif. Aplikasi yang umum adalah memantau pengukuran yang akurat dalam cairan, pengukuran, dan transfer tahanan. Dapat menampilkan aliran sesaat dan kumulatif, dan mendukung output analog, output komunikasi, dan fungsi kontrol relai.
SKU: SUP-LDG - Water Quality Sensors
Fluorescence Dissolved Oxygen Electrode SUP-DO-7012
SUP-DO-7012 is based on luminescent optics technology.
Optical dissolved oxygen sensors are approved by ASTM International Method D888-05.Features
1. Imported hash sensor, more accurate and reliable
2. Service life is 1-2 years
3. It can be used in harsh working conditions such as aeration tanks, sewage treatment, marine aquaculture, etc.SKU: SUP-DO-7012 - Water Quality Sensors
Fluorescence Dissolved Oxygen Meter SUP-DY2900
Fluorescence dissolved oxygen meter is an intelligent online optical analysis instrument, which is widely used in continuous monitoring of dissolved oxygen, saturation and temperature in solutions such as thermal power, chemical fertilizers, metallurgy, environmental protection, pharmaceuticals, biochemicals, food and tap water.
The continuous monitoring data can be remotely monitored and recorded by connecting the recorder through the transmission output, and can also be connected to the RS485 interface through the Modbus-RTU protocol, which can be easily connected to the computer for monitoring and recording.Features
-The circuit design adopts modular design.
-Isolation transmission output is adopted, which is less affected by interference.
-Using isolated RS485 communication.
-It can measure dissolved oxygen, saturation and temperature.
-Air calibration can be performed.
-With automatic temperature compensation function.
-Has the function of setting high and low alarms and hysteresis.
-It has the function of setting buzzer and LCD backlight switch.
-Language can be selected, currently supports Chinese and English.SKU: SUP-DY2900 - Level Sensors
Integrated ultrasonic level gauge SUP-DP
The SUP-MP integrated ultrasonic level gauge calculates the distance by using the time required for the reflected ultrasonic wave to pass through the material level or liquid level.
Because it does not contact the medium, it is easy to install and maintain, and it is used more and more in today’s industrial field.
It can be widely used in the measurement of the height of various liquid and solid materials, especially in some sites with high hygienic requirements, it has irreplaceable advantages.Features
-LCD dot matrix Chinese / English display, simple operation
-Precision filtering algorithm to exclude false measurements
-Multiple working condition algorithm selection to ensure measurement accuracy
– Piezoelectric surge safety protection
– Automatic temperature compensation
-Echo curve display, helpful for on-site debugging and fault detection
-Self -inspection function, rich self-inspection information, convenient for users to repair and debug
-Independent password function, different levels of passwords can be set in factory and calibration, easy to manage
-Various display units are optional
-The range ratio is expanded to prevent the measured value from exceeding the range and causing misjudgmentSKU: SUP-DP - Water Quality Sensors
pH controller SUP-PH6.0
PH6.0 is one of the intelligent online chemical analysis instruments, which is remotely transmitted to the monitoring room through RS485 or current transmission for record keeping.
It can continuously monitor data, and realize remote monitoring and recording by connecting the recorder through the transmission output.
It can also be connected to the RS485 interface through the MODBUS-RTU protocol, which can be easily connected to the computer to realize monitoring and recording.
It is widely used in thermal power, chemical fertilizers, metallurgy, and environmental protection.
Pharmaceutical, biochemical, food and tap water solutions for continuous monitoring of PH value or ORP value and temperature.Features
-The circuit design adopts modular design.
-Isolation transmission output is adopted, which is less affected by interference.
-Using isolated RS485 communication.
-It can perform pH/ORP measurement and temperature measurement.
-With configuration temperature manual and automatic compensation functions.
-Has the function of setting high and low alarms and hysteresis.
-It has the function of setting buzzer and LCD backlight switch.SKU: pH controller SUP-PH6.0 - Water Quality Sensors
pH glass electrode SUP-PH-5022
The PH glass electrode adopts the DOKA structure, which can block the substances that are easy to poison the electrode, such as the medium containing sulfide, amine, chromate or other metal ions. The newly developed polymer solid electrolyte is used, and the temperature is stable to 135°C. Has the characteristics of non-toxic, physiological safety, aging resistance, low potential drift, stable measurement and so on.
SUP-PH5022 is suitable for measuring the quality of heavily polluted water, and is widely used in the chemical industry, industrial sewage, electroplating sewage, power plants and waste incinerators, sugar industry, printing and dyeing and other industries.Features
Fully upgrade the sealing ring/PTFE diaphragm and glass structure of the PH electrode to prevent pollution.SKU: SUP-PH-5022 - Water Quality Sensors
pH tetrafluoride electrode SUP-PH-5013A
The PH PTFE electrode is made of polytetrafluoroethylene, which is resistant to strong acid and alkali, corrosion resistance, and is suitable for use in harsh environments.
Various temperature compensation models PT100/PT1000/NTC 10K can be installed according to customer needs.
Widely used in medicine, pigments, coatings, pulp and paper, intermediates, fertilizers, starch, sewage treatment, environmental protection, electroplating wastewater treatment and other industries.Features
Low-impedance glass sensitive film, wear-resistant, strong acid and alkali resistance, annular protection ring in front of the probe, protective glass bulb, better accuracy and linearitySKU: SUP-PH-5013A - Pressure Sensors
Pressure Transmitter SUP-P400
SUP-P400 pressure transmitter adopts high-performance, high-stability OEM pressure core as the signal measuring element.
The sensor signal is converted into a standard signal output through special signal processing.
After long-term aging and stability screening, the product performance is stable It is reliable and can be used in the open-air site with harsh environment.
It can display the pressure on the spot, and the zero point can be moved to the full range.
This series of products are widely used in industrial process control, petroleum, chemical, metallurgical and other industries.Features
1. There are two options of dial indicator and liquid crystal display
2. Selected sealing rings to solve the waterproof problem of outdoor occasions
3. Selected stainless steel thread plus anti-corrosion 316L isolation diaphragm
4. Integrated integrated circuit design, stronger stabilitySKU: SUP-P400 - Pressure Sensors
Pressure transmitters SUP-P300
The pressure sensitive core of SUP-P300 series pressure transmitter adopts high-performance silicon piezoresistive pressure oil-filled core.
The internal special integrated circuit converts the sensor millivolt signal into standard voltage, current or frequency signal, which can be directly connected with The computer circuit interface card, control instrument, intelligent instrument and PLC, etc. are easily connected.
Long-distance transmission can adopt current output mode. It has a small size, light weight, all-stainless steel sealed structure, and can work in corrosive environments.
The product is easy and simple to install, and has extremely high seismic and impact resistance.Features
-Small structure and easy installation.
-Advanced diaphragm / oil-filled isolation technology.
-High stability and high reliability.
-Anti- vibration and anti-radio frequency interference.
-316L stainless steel isolation diaphragm structure.
-High- precision, all-stainless steel structure.
-Micro amplifier, voltage, current, RS485 signal output.
-Strong anti-interference and good long-term stability.
-Diversified forms and structures, easy to install and use.
-Wide range, can measure absolute pressure, gauge pressure and sealing reference pressure.
– Vibration and shock resistance.SKU: SUP-P300 - Water Quality Sensors
Regular pH glass electrode SUP-PH-5018
The PH-5018PH glass electrode has a large sensitive area, strong resistance to mechanical shock, and a temperature resistance of 100 degrees.
The electrode can be widely used in microbial technology, pharmacy, food and beverage, sugar making, including various chemical processes such as chlor-alkali, mining and smelting, papermaking, pulp, textiles, petrochemicals, semiconductor electronics industry, and wastewater treatment.Features
1. The electrode is not afraid of corrosion
2. The electrode bulb has a large sensitive area and fast response time
3. The electrode bulb increases the impact resistance by 30% and is not easy to break
4. Multiple interfaces-multiple interface designs such as S8M, VP, K2, etc., which can be used interchangeably with other electrodes
5. The output signal is accurate and the service life is longerSKU: SUP-PH-5018 - Signal Calibrator
Signal generator SUP-C702S
Generator sinyal SUP-C703S memiliki berbagai fungsi pengukuran dan keluaran sinyal, termasuk tegangan, arus, dan termokopel. Generator ini mengadopsi layar LCD definisi tinggi dan tombol silikon fungsional, pengoperasian sederhana, waktu siaga lama, presisi tinggi, dan fungsi Keluaran yang dapat diprogram (dapat mengeluarkan nilai sinyal secara linier sesuai dengan waktu yang ditetapkan oleh pengguna).
Pengukur dapat diatur dengan fungsi konversi rentang, dan sinyal dapat dikeluarkan atau diukur sesuai dengan rentang tampilan.
Pengukur ini banyak digunakan dalam debugging laboratorium, PLC bidang industri dan instrumen proses, katup listrik, dll.SKU: SUP-C702S-UP - Pressure Sensors
Single crystal silicon pressure SUP-P3000
SUP-P3000 single crystal silicon pressure transmitter is used to measure the level, density and pressure of liquid, gas or steam, and then convert it to 4-20mA HART current signal output.
It can also communicate with BST9900, HART375 or BST Modem. Carry out parameter setting and process control.Features
1. Industrial-grade precision, stable and accurate, and the precision can reach 0.075 level
2, the amount of drive cover , bis protective membrane
3. Excellent stability
4. Adjustable damping, strong resistance to overpressure
5. Long service life, pressure of ordinary diffused silicon more than twice the , strong stabilitySKU: SUP-P3000 - Temperature Sensor
Temperature module SUP-ST500
Temperature Transmitter SUP-ST500 Head Mounted Smart Temperature transmitter dapat digunakan dengan beberapa tipe sensor Detektor suhu resistansi (RTD): PT100,Cu50, Thermocouple (TC):B.E,J,K,N,R,S,T,Wre3-25,Wre5-26, mudah dipasang dengan akurasi pengukuran yang lebih baik melalui solusi kabel langsung.
SKU: SUP-ST500 - Temperature Sensor
Temperature Sensors SUP-WZPK
Probe suhu sekrup untuk aplikasi standar lebih disukai digunakan untuk mengukur suhu dalam cairan dan gas. Kriteria seleksi yang menentukan adalah fitur penyegelan yang andal dari jenis instalasi ini dengan vakum dan tekanan berlebih.
Area penerapannya antara lain pada teknologi AC dan teknik pendingin serta HVAC dan sektor rekayasa peralatan.
Tabung pelindung yang terbuat dari berbagai bahan melindungi sisipan pengukur pengaruh kimiawi dan kerusakan mekanis. Bahan tabung pelindung yang sesuai dipilih sesuai dengan kondisi di lapangan.SKU: SUP-WZPK
