Software as a Services
MICROTHINGS PLATFORM Package
PIR Motion Detector is an INPUT DEVICE, the motion sensor works on the principle of sensing infrared energy (heat) emitting from an intruder”s body moving through a protected area.It is with internal Antenna and MCU inside.
Showing all 5 results
The wired Ceiling PIR Motion detector is an INPUT DEVICE, The CPIR-03 PIR motion detector is designed to provide detection of criminal intrusion through door frames and window frames into a protected area by sensing infrared energy (heat) emitting from an intruder’s body moving through a protected area. The MOTION SENSOR is commonly referred to as a PIR, which stands for passive Infrared. Upon detection of intrusion, the CPIR-03 automatically generates an alarm signal to control panel. The sensor also provides a tamper contact output. The unit is RF and EMI Immunity to interferences produced by radio device. The unit is can be Ceiling mounted.
The Active photoelectric Beam detectors are perimeter intrusion detector for outdoor application, E.g.: fence, wall, outside.
In standby mode, the photoelectric beams will create some invisible infrared rays. Once anybody pass through them, the invisible infrared rays will be block, and create alarm signal then send to the alarm control panel.
Four Beam Active Photoelectric Detector
4-Beam Active Photoelectric Detector. The Active photoelectric Beam detectors are perimeter intrusion detector for outdoor application, E.g.: fence, wall, outside. In standby mode, the photoelectric beams will create some invisible infrared rays. Once anybody pass through them, the invisible infrared rays will be block, and create alarm signal then send to the alarm control panel.
Introduction:
The Active photoelectric Beam detectors are perimeter intrusion detector for outdoor application, E.g.: fence, wall, outside.
In standby mode, the photoelectric beams will create some invisible infrared rays. Once anybody pass through them, the invisible infrared rays will be block, and create alarm signal then send to the alarm control panel.
The wired PIR Motion Sensor is an INPUT DEVICE, the motion sensor works on the principle of sensing infrared energy (heat) emitting from an intruder”s body moving through a protected area. The MOTION SENSOR is commonly referred to as a PIR, which stands for passive Infrared. The sensor usually covers a 40″ x 40″ open area at a 90 degree angle.
Introduction:
The Active photoelectric Beam detectors are perimeter intrusion detector for outdoor application, E.g.: fence, wall, outside.
In standby mode, the photoelectric beams will create some invisible infrared rays. Once anybody pass through them, the invisible infrared rays will be block, and create alarm signal then send to the alarm control panel.
Features :
Integrated DSP chip, patented multi-dimensional fault-tolerant, true detection alarm technology.
Wired/BUS compatible, 8 sections digital frequency conversion;
Dynamic frequency analysis, intelligent alarm linkage;
Unique displacement receiving, strong power digital filter;
Intelligent power transmission, intelligent anti-fog;
Adopt coaxial aspherical dual-focus exact optical focusing lens;
Can adjust beams without opening outer case.