Water Quality Sensors
Water Quality Sensors
Showing 1–20 of 58 results
-
Water Quality Sensors
Chlorophyll Sensor
Chlorophyll Sensor mengadopsi teknologi optik terkemuka dengan sikat pembersih otomatis, yang secara otomatis dapat memantau kandungan klorofil dalam air secara real time. Sensor alga biru-hijau mengadopsi prinsip metode fluoresensi, yang dapat memainkan peran peringatan dini dalam reproduksi alga. Menggunakan mode keluaran RS485, sinyalnya stabil dan datanya akurat.
SKU: RS-CH-N01-2 -
Water Quality Sensors
COD Chromium Method Online CODG-3000
Instrument Features
The unique design makes this product have lower failure rate, lower maintenance, lower reagent consumption and higher cost performance than similar products.
Select valve assembly: select the reagent sampling sequence, the channels are flexible and diverse, the functions are changeable, and it has the advantages of minimum dead volume, easy maintenance and long life.
Micro metering component: The precise metering of reagents is realized through the visual photoelectric system, which overcomes the quantitative error caused by the wear of the peristaltic pump tube; at the same time, the precise quantification of micro-reagents is realized, and each dose is only 1 ml, which greatly reduces the use of reagents quantity.SKU: CODG-3000 -
Water Quality Sensors
Conductivity meter SUP-TDS210-B
SUP-TDS210-B conductivity meter with different electrodes can be well adapted to on-site measurement.
Whether it is common tap water, boiler feed water, pure water, ultra-pure water, industrial water, sewage, etc.Features
-Using (4 ~ 20mA) is transmission output isolation, less affected by interference.
-Using isolated RS485 communication, via Modbus-RTU protocol can be easily linked into a computer.
-With configuration temperature manual and automatic compensation functions.
-Has the function of setting high and low alarms and hysteresis.
-It has the function of setting buzzer and LCD backlight switch.
-Has the function of setting high and low alarms and hysteresis.
-It has the function of setting buzzer and LCD backlight switch.SKU: SUP-TDS210-B -
Water Quality Sensors
Digital dissolved oxygen electrode BH-485-DO
BH-485 series on-line dissolution electrode adopts galvanic cell type oxygen sensing electrode, and realizes the functions of automatic temperature compensation and digital signal conversion inside the electrode. It has the characteristics of quick response, low maintenance cost, real-time online measurement and so on. The electrode adopts standard Modbus RTU ( 485 ) communication protocol, DC 24V power supply, four-wire mode, which can be easily connected to the sensor network.
SKU: BH-485-DO -
Water Quality Sensors
Digital pH electrode BH-485
BH-485 series online pH electrode adopts the principle of electrode method, and realizes automatic temperature compensation inside the electrode, and automatically sets standard solution. The electrode adopts imported composite electrode, which has the characteristics of high precision, good stability, long service life, quick response, low maintenance cost, real-time online measurement and so on. The electrode adopts standard Modbus RTU ( 485 ) communication protocol, DC 24V power supply, four-wire mode, which can be easily connected to the sensor network.
SKU: BH-485 -
Water Quality Sensors
Fluorescence Dissolved Oxygen Electrode SUP-DO-7012
SUP-DO-7012 is based on luminescent optics technology.
Optical dissolved oxygen sensors are approved by ASTM International Method D888-05.Features
1. Imported hash sensor, more accurate and reliable
2. Service life is 1-2 years
3. It can be used in harsh working conditions such as aeration tanks, sewage treatment, marine aquaculture, etc.SKU: SUP-DO-7012 -
Water Quality Sensors
Fluorescence Dissolved Oxygen Meter SUP-DY2900
Fluorescence dissolved oxygen meter is an intelligent online optical analysis instrument, which is widely used in continuous monitoring of dissolved oxygen, saturation and temperature in solutions such as thermal power, chemical fertilizers, metallurgy, environmental protection, pharmaceuticals, biochemicals, food and tap water.
The continuous monitoring data can be remotely monitored and recorded by connecting the recorder through the transmission output, and can also be connected to the RS485 interface through the Modbus-RTU protocol, which can be easily connected to the computer for monitoring and recording.Features
-The circuit design adopts modular design.
-Isolation transmission output is adopted, which is less affected by interference.
-Using isolated RS485 communication.
-It can measure dissolved oxygen, saturation and temperature.
-Air calibration can be performed.
-With automatic temperature compensation function.
-Has the function of setting high and low alarms and hysteresis.
-It has the function of setting buzzer and LCD backlight switch.
-Language can be selected, currently supports Chinese and English.SKU: SUP-DY2900 -
Water Quality Sensors
High temperature sterilization PH CPH5805
Scope of application :
Bioengineering: amino acids, blood products, genes, insulin, interferon
Pharmaceuticals: antibiotics, vitamins, citric acid
Beer: brewing, mashing, boiling, fermentation, filling, cold wort, deoxygenated water
Food and Beverage: Online measurement of biochemical processes such as monosodium glutamate, soy sauce, dairy products, fruit juice, yeast, sugar, drinking water, etc.SKU: PH CPH5805 -
Water Quality Sensors
High temperature sterilization PH CPH5806
Features :
1. Adopt high temperature resistant gel and high temperature resistant solid dielectric double liquid junction structure, the electrode can withstand 0.4MPa without back pressure. Can be directly used for sterilization at a temperature of 130 °C
2. There is no need to supplement the dielectric, and the maintenance is small
4. Adopt S7 socket or PG13.5 threaded socket, which can be used for the interchange of foreign electrodes
5. Electrode lengths are 120, 150, 210, 260, 320mm, which can be selected as needed
6. Use with 361L stainless steel sheathSKU: CPH5806 -
Water Quality Sensors
Industrial Acid Concentration Meter SJG-3083
SJG-3083 industrial acid-base concentration meter is our company’s new generation of Chinese (English) microcomputer type high-end instrument, with Chinese (English) display, Chinese (English) menu operation, full intelligence, multi-function, measurement performance High, environmental adaptability and other characteristics. It can be widely used in thermal power, chemical and other industries. It is suitable for checking the concentration of regeneration liquid in the process of producing high-purity water by ion exchange, or for preparing pickling liquid for boilers and pipelines, and continuously monitoring the concentration of acid, alkali and salt in the solution.
SKU: SJG-3083 -
Water Quality Sensors
Industrial composite PH or ORP PH8000
Electrode Features
1. Adopt international advanced solid dielectric and large-area PTFE liquid junction, which is not easy to block and easy to maintain
2. The long-distance reference diffusion path greatly prolongs the service life of the electrode in harsh environments
3. There is no need to supplement the dielectric, and the maintenance is small
4. High measurement accuracy, fast response and good repeatabilitySKU: PH8000 -
Water Quality Sensors
Industrial composite PH-ORP PH8083
Electrode Features
1. Adopt international advanced solid dielectric and large-area PTFE liquid junction, which is not easy to block and easy to maintain
2. The long-distance reference diffusion path greatly prolongs the service life of the electrode in harsh environments
3. There is no need to supplement the dielectric, and the maintenance is small
4. High measurement accuracy, fast response and good repeatabilitySKU: PH8083 -
Water Quality Sensors
Industrial composite PHO-RP PH8011
Electrode Features
1. Adopt international advanced solid dielectric and large-area PTFE liquid junction, which is not easy to block and easy to maintain
2. The long-distance reference diffusion path greatly prolongs the service life of the electrode in harsh environments
3. There is no need to supplement the dielectric, and the maintenance is small
4. High measurement accuracy, fast response and good repeatabilityApplications:
Thermal power plant/Chemical fortilizer/Chemical industry/Metallurgy/Environmental protection/Pharmacy manufacturing/Biochemistry/Foodstuff/Running waterSKU: PH8011 -
Water Quality Sensors
Industrial composite pure water PH8022
Basic characteristics of PH pure water electrode
1. Filled with high molecular polymer, the reference junction potential is very stable.
2. The diffusion potential is very stable. Since the large-area diaphragm is distributed around the glass membrane bubble, the distance from the reference membrane to the glass membrane bubble is constant and close, and the ions diffused from the membrane quickly form a complete measurement with the glass electrode. The loop responds quickly, so that the diffusion potential is not easily affected by the external flow rate, etc., so it is very stable.
3. Since the diaphragm is filled with high molecular polymer, the outflow of electrolyte is small and stable, and will not pollute the pure water to be measured.
Therefore, the above characteristics of the composite electrode make it very suitable for measuring the pH value of high-purity water!
Model : PH8022
Measuring range: 0-14pH
Temperature range: 0-85ā
Pressure resistance: 0.6MPa
Slope: ā„96%
Zero point potential: 7PH±0.3
Internal resistance: MĪ©(25ā)ļ¼50MĪ©
Inner type: three composite electrodes (temperature compensation and solution grounding)
Installation size: upper and lower 3/4NPT pipe thread
Connection method: low noise cable directly out.SKU: PH8022 -
Water Quality Sensors
Industrial composite sewage PH8012
Basic Principles of PH Electrodes
The electrodes used in pH measurement are also known as galvanic cells. A galvanic cell is a system that converts chemical energy into electrical energy. The voltage of this battery is called the electromotive force (EMF). This electromotive force (EMF) consists of two half-cells. One of the half-cells is called the measuring cell, and its potential is related to a specific ionic activity; the other half-cell is the reference half-cell, usually called the reference electrode, which is generally connected to the measuring solution and is connected to the measuring instrument.SKU: PH8012 -
Water Quality Sensors
Industrial Conductivity DDG-2090
DDG-2090 simplifies functions on the basis of guaranteed performance, clear display, easy operation and excellent test performance make it very cost-effective. It can be widely used in thermal power, chemical fertilizer, metallurgy, environmental protection, pharmaceutical, biochemical, food and tap water and other solutions in the continuous monitoring of conductivity values.
SKU: DDG-2090 -
Water Quality Sensors
Industrial Conductivity Meter DDG-3080
DDG-3080 industrial conductivity meter is our company’s new generation of Chinese (English) microcomputer high-end instrument, with Chinese (English) display, Chinese (English) menu operation, full intelligence, multi-function, high measurement performance , strong environmental adaptability and so on. It can be widely used in thermal power, chemical fertilizer, metallurgy, environmental protection, pharmaceutical, biochemical, food and tap water and other solutions for continuous monitoring of conductivity values.
Instrument features : new layout design, cast aluminum shell, metal texture, to create a high-grade E era water meter!
Full Chinese display, friendly interface, multi-parameter simultaneous display: simultaneous display of conductivity, output current, temperature, time and status on one screen. Adopt high-resolution dot matrix liquid crystal display module, all data, status and operation prompts are displayed in Chinese (English), and there is no symbol or code defined by the manufacturer at all.SKU: DDG-3080 -
Water Quality Sensors
Industrial dissolved oxygen electrode DOG-209F
Dissolved oxygen electrode characteristics :
DOG-209F dissolved oxygen sensor has high stability and reliability, can be used in harsh environments, and requires less maintenance. It is suitable for dissolved oxygen in the fields of urban sewage treatment, industrial wastewater treatment, aquaculture and environmental monitoring. continuous measurement.SKU: DOG-209F