NB IoT OBD Tracker

NB IoT OBD Tracker

Introduction :
HS-4000C is a plug & play 4G CAT M1, NB-IoT OBD gps tracker that can install in cars & trucks, it reads data from car ECU, including Odometer mileage (100% accuracy), fuel consumption, fuel level, meter speed, engine temperature, DTC code, VIN number & others. It can record driving behavior data & send to server for analysis. It is widely used in fleet management & insurance telematics.

Features:
OBDII and CANBUS protocol, DC 12V and 24V;
2G GSM/GPRS quad-band, 3G UMTS quad-band;
4G CAT M1, NB-IoT network (covering all 4G bands world-wide);
Support A-GPS (make GPS locating much faster);
Plug and play, Small size, no installation cost;
Collect fuel consumption data, meter speed, RPM;
Very accurate Odometer mileage data (accuracy=100%);
Collect DTC (Diagnostic Trouble Code) for remote diagnostic;
Collect VIN number, engine temperature;
Internal GSM and GPS antennas;
TCP and UDP protocol;
Update firmware over the air;
Illegal start-up, impact and rollover alarm;
Detect harsh acceleration, braking, turn and high revolution;
Driving behavior recording and analysis;
Store break points data in non-volatile memory;
Track on google map and other maps;
Android, iOS APP & telematics software free for ever;
Auto sleep mode to save automotive power;
Wide working temperature range: -30 to +80℃.

Specifications:
GPS Specifications
GPS Module :U-blox
Channel : 50 pararrel channels
Position Accuracy : ≤ 2.5m
Speed Accuracy : ≤0.1m/s
Sensitivity
Tracking: -162dBm
Acquisition Time
Cold Start: 29s
Warm Start: 29s
Hot Start: 1s

Communication
Ublox Sara-R410M-O2B module
4G CAT M1 network bands:
B1, 2, 3, 4, 5, 8, 12, 13, 17, 18, 19, 20, 25, 26, 28 (and 39 in M1-mode only)

MCU
NXP ARM Cortex M3

Interface
Mini USB Port : 1
GPS Antenna : Internal
GSM Antenna : Internal
OBDII Connector
SAE J1962

Air Interface Protocol
Transmit Protocol : TCP, UDP, SMS

Vehicle Protocol
ISO 15765-4 (CAN)
ISO 14230-4 (Keyword Protocol 2000）
ISO 9141-2 (Asian, European, Chrysler vehicles)
SAE J1850 VPW (GM vehicles)
SAE J1850 PWM (Ford vehicles)
ISO 15765
ISO 11898 (raw CAN)
SAE J1939 OBD protocol

Non-legislated OBD protocols (can be added according to customer’s needs):
Single Wire CAN (SW-CAN) – GM proprietary network
Medium Speed CAN (MS-CAN) – Ford proprietary network

General Specifications
Sensor : Accelerator sensor and shock sensor
Case Material : ABS
Operation Voltage : DC 12 or 24V
Active current : 70mA
Operation Temperature : -30 to +80℃
Operating Humidity : 5% to 95%, non-condensing
Dimension : 624820mm
Weight : 60g