Interkom Video IP untuk Tiang Pintar adalah sistem komunikasi yang memadukan kemampuan video, audio, dan akses jarak jauh ke tiang jalan pintar. Sistem ini biasanya digunakan untuk keselamatan publik, bantuan pengunjung, dan kontrol akses di kota pintar, pusat transportasi, dan infrastruktur perkotaan.
Spesifikasi, Unit Fungsional dan Parameter :
Power supply input | DC12V/2A |
POE power | supply Support PoE IEEE802.3 af |
Functional components interface | Alarm input interface/ Alarm output interface/ network interface/ power supply interface/ recording output interface |
Network communication protocol | TCP/IP、UDP、ARP、ICMP、IGMP、HTTPTCP/IP、 UDP、ARP、ICMP、IGMP、HTTP |
Wide angle visibility | 140~160 degree |
Video resolution rate | QVGA/VGA/720P/1080P |
SNR | ≥60 |
Frequency response | 20Hz~18KHz |
Audio delay | ≤ 200ms |
Working temperature | -20℃~60℃ |
Working humidity | ≤90%RH (no condensing) |
IP Video Intercom Terminal Configuration
Mandatory configure network parameters
1. Use the couplet cable to connect computer (which is installed IP audio configuration tool) and terminal. Under the [optical disc:\tool software] menu to find and run “IP audio configuration tool”, input the defaulted password “123456”.
2. From the right menu choose【Mandatory configure】, then fill the correct parameters in the【terminal parameters】, click “send parameters” button to complete the IP parameters
Settings.
Visit Web page
1. Enter IP video intercom paging console IP address(the factory setting is 192.168.1.101)from the Web browser, then enter.
2. Enter the user name(admin)and password(admin)from the Web window, then click OK.
Trouble Shooting
Fault phenomena | Fault reasons & exclude |
Why the terminal is still “offline”? | 1、Check the software server and the main controller is normal opened or not. It`s required to close all firewall before open the software server (including system built-in firewall and other antivirus software firewall) 2、Check the network connection is normal or not. After the terminal powered on, the network port green light is norm on, meantime the orange light will be short and fast flash, it means the network cable hard-connected normal. If the network port green light is not on, it means the network hard-connected problem, please check the terminal network cable and switcher whether they work normal, damaged and disconnect or not etc. 3 、 Check the terminal IP setting. Please check the terminal ID, sever IP, local IP, gateway IP …etc parameters. |
When web show abnormal? | Please clear the caches or change the browser |
Industrial alluminum case
Camera support dynamic bandwidth, strong light suppression
and weak light compensation
One-key emergency button, full-duplex intercom
Built-in speaker and microphone, hands-free calling and
receiving broadcast
Catatan :
Untuk Lebih Detail Silahkan Hubungi Team Sales and Marketing Kami
There are no reviews yet.