-4%

Wireless RS485 Data Converter


WT-01 wireless data converter is an industrial class, high-performance, low-power, long-range micro-power RF wireless data transmission module. It is special for converting the wired RS485 port to wireless transmission. Widely used in the RS485 serial device data transmission into radio frequency transmission, to solve the high cost and wiring difficult problems of industrial field.

Rp1,390,000 Rp1,450,000

Wireless RS485 Data Converter
Model no:WT-01

Introduction :
WT-01 wireless data converter is an industrial class, high-performance, low-power, long-range micro-power RF wireless data transmission module. It is special for converting the wired RS485 port to wireless transmission. Widely used in the RS485 serial device data transmission into radio frequency transmission, to solve the high cost and wiring difficult problems of industrial field. E.g.: converting PLC, Smart meter, Remote I/O Data acquisition modules.

Features :
WT-01 wireless data converter is an industrial class, high-performance, low-power, long-range micro-power RF wireless data transmission module. It is special for converting the wired RS485 port to wireless transmission. Widely used in the RS485 serial device data transmission into radio frequency transmission, to solve the high cost and wiring difficult problems of industrial field. E.g.: converting PLC, Smart meter, Remote I/O Data acquisition modules.
WT-01 wireless data converter using half-duplex module, provides transparent transmission by wireless to instead of cable. Built-in industrial-grade module RF chip based on spread spectrum frequency hopping technology, in the stability, anti-jamming capability and receiver sensitivity are beyond the existing GFSK module. Built-in high-performance low-power high-speed microprocessors, data processing capabilities, computing speed, data integrity are higher than the market similar products.
WT-01 wireless data converter built-in single-chip processing procedures, customers do not need to configure it, put on the scene can be applied, simple, easy to use, for remote monitoring and control of the scene to provide a simple and convenient solution.
Integrated the Wireless GSM 3G RTU S280, it can create a front-end I/O wireless data transceiver, Wireless GSM 3G RTU S280 for data processing and forwarding to SCADA, OPC Server, cloud platform and other monitoring center system.

Spesification :
1. Based on LoRa spread spectrum modulation technology;
2. Wide range power supply 9~36VDC with over voltage and phase-reversal protection;
3. Inbuilt ultra-low power consumption and high-performance microprocessor MCU, reliable performance with in-built watchdog;
4. Half-duplex communication, serial data transparent transmission;
5. 420 ~ 450MHz ISM free band, default 433Mhz, other bands can be customized;
6. Receive sensitivity up to -148dBm, the maximum transmit power +27 dBm.
7. Efficient forward error correction coding technology and frequency hopping mechanism, anti-interference ability, low bit error rate.
8. Support serial wakeup and air wake-up function, at any time send and receive data, no cycle wake up time, do not have to worry about crashes;
9. No need to configure any parameters, plug and play;
10. Effective communication distance up to 3 to 5 km (can be customized 6 to 10 km);
11. Broadcast transmission data, can be achieved point to point, one to many, multi-point networking and other communications applications;
12. Provides 1 channel 9~36VDC power source output for external device, saving wiring cost;
13. Industrial class design suitable for long time work applications;
14. using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field;
15. L120 * W74 * H25mm, compatible wall installation and DIN35mm industrial rail installation.

 

Weight 1000 g

Technical Spesification :
1. Based on LoRa spread spectrum modulation technology;
2. Wide range power supply 9~36VDC with over voltage and phase-reversal protection;
3. Inbuilt ultra-low power consumption and high-performance microprocessor MCU, reliable performance with in-built watchdog;
4. Half-duplex communication, serial data transparent transmission;
5. 420 ~ 450MHz ISM free band, default 433Mhz, other bands can be customized;
6. Receive sensitivity up to -148dBm, the maximum transmit power +27 dBm.
7. Efficient forward error correction coding technology and frequency hopping mechanism, anti-interference ability, low bit error rate.
8. Support serial wakeup and air wake-up function, at any time send and receive data, no cycle wake up time, do not have to worry about crashes;
9. No need to configure any parameters, plug and play;
10. Effective communication distance up to 3 to 5 km (can be customized 6 to 10 km);
11. Broadcast transmission data, can be achieved point to point, one to many, multi-point networking and other communications applications;
12. Provides 1 channel 9~36VDC power source output for external device, saving wiring cost;
13. Industrial class design suitable for long time work applications;
14. using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field;
15. L120 * W74 * H25mm, compatible wall installation and DIN35mm industrial rail installation

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Wireless RS485 Data Converter”

This site uses Akismet to reduce spam. Learn how your comment data is processed.

There are no reviews yet.

Open chat
Powered by