Wireless Power Status Monitoring Alarm


The GSM 3G 4G LTE Phase Loss Monitoring Alarm is special for remotely monitoring onsite temperature, humidity,AC power, power status through wireless GSM/3G/4G Network. When the 3/Single phase power failure, power voltage or temperature, humidity exceed high threshold or low threshold value, will send SMS alert to upto 10 preset mobile phone immediately.
Supports SMS,GPRS,3G,4G Lte Cellular Networks. Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the MICROTHINGS IoT Cloud Platform and OPC, SCADA and MES systems to build an industiral IoT Solution.

Rp1,890,000

Wireless Power Status Monitoring Alarm

Wireless Power Status Monitoring Alarm (Phase Loss, Power off, Temperature, DC Voltage)
Model :RTU5029

The GSM 3G 4G LTE Phase Loss Monitoring Alarm is special for remotely monitoring onsite temperature, humidity,AC power, power status through wireless GSM/3G/4G Network. When the 3/Single phase power failure, power voltage or temperature, humidity exceed high threshold or low threshold value, will send SMS alert to upto 10 preset mobile phone immediately.
Supports SMS,GPRS,3G,4G Lte Cellular Networks. Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the MICROTHINGS IoT Cloud Platform and OPC, SCADA and MES systems to build an industiral IoT Solution.

Features:
1. Can be operated from anywhere, no distance limitation;
2. No call charges for inquiry. the GSM 3G 4G LTE Phase Loss Monitoring rejects the call from authorized number then return onsite temperature, humidity,AC power status and power voltage on the first ‘ring’;
3. Multiple applications. (3/Single phase status, power status, solar panel, dc voltage,temperature, humidity);
4. Up to 10 authorized phone numbers, 5 can be used to receive SMS,and 5 can be used to call and SMS while alarm occurrence;
5. 1 input for Temperature & Humidity,AC power status monitoring;
6. External AC Power status monitoring, AC ON/OFF will send SMS to authorized phone numbers;
7. Inbuilt MCU monitoring the DC input Voltage value, measure range is 0-36VDC, no need additional sensor to save cost;
8. Timer Report—Can setup every x hours automatically send its status/Value to the authorized numbers;
9. Support remotely read historic data via SMS;
10. Support Modbus TCP and Modbus RTU over TCP protocol for cloud monitoring;
11. Rechargeable Backup Battery inside can last 8hours;
12. Secure – Using caller ID and password for identification, unknown callers are ignored;
13. Programmable by SMS Commands or APPs with password protection;
14. Based on GSM/3G/4G Network, applied to many applications.
15. Remote Reset via SMS, Remote Reboot via SMS, Automatic Reboot Periodicity

Spesification :
DC Power supply 9~36VDC, recommend 12V DC 1A
Power consumption :12V input Max. 50mA/Average 30mA
Frequency range
2G :850/900/1800/1900Mhz
3G :W :900/2100Mhz C :850/1900Mhz T :850/2100Mhz
4G LTE
SIM Card :Supporting 3V SIM Card
Antenna 50 Ω SMA Antenna interface
Protocol Mobus TCP and Modbus RTU over TCP
Temp&Humi input AM230X:Temperature from -40 to 80℃ (0.5°C accuracy),Relative Humidity from 0-99RH%, accuracy is 3%.
Power Status :3-phase or single-phase
Alert no. :10 authorized phone numbers
Backup Battery :900mAH, last 8hours
Exterior dimension :L70mm*W88mm*H30mm
Net Weight :300 g

Weight 1000 g

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Wireless Power Status Monitoring Alarm”

This site uses Akismet to reduce spam. Learn how your comment data is processed.

There are no reviews yet.

Open chat