Wireless Digital Input IoT Module 4G Version


The Wireless DIN IoT Module is a wireless Internet of things gateway, designed for converting digital(NC/NO) signal to Wireless communcation over SMS/GPRS/3G/4G/NB-IoT Cellular Network, and connect to the IoT Cloud Platform.
The Wireless DIN IoT Module suitable for water level sensor, smoke detector, door contact, motion sensor,and other digital output sensor,etc.

Rp1,168,000

Wireless Digital Input IoT Module
Model : IoT101

The Wireless DIN IoT Module is a wireless Internet of things gateway, designed for converting digital(NC/NO) signal to Wireless communcation over SMS/GPRS/3G/4G/NB-IoT Cellular Network, and connect to the IoT Cloud Platform.
The Wireless DIN IoT Module suitable for water level sensor, smoke detector, door contact, motion sensor,and other digital output sensor,etc.
The Wireless DIN IoT Module supports Modbus TCP Protocol and MQTT Protocol, compatiable Microthings cloud platform and other cloud platform or SCADA or OPC Server.

Features :
1. Can be used as a complete product or as a secondary development module;
2. Two working modes are available:Normal mode: Real-time data transmission,Users can inquiry the real-time status;Low power consumption mode: Ultra low power consumption(<230uA);
3. Multiple communication methods:GSM,GPRS,3G,4G,NB-IoT,LoRa,Ethernet,etc;
4. Coverting digital (NC/NO) signal to cloud platform over cellular network;
5. Support configure parameters and query real-time data via SMS,software,cloud platform;
6. Up to 10 SMS Alert and dial numbers, can program to receive specified alarm message;
7. Support two different server centers,can set IP address or domain name ;
8. Support Modbus RTU over TCP and MQTT protocol;
9. Wide range power supply 7~24VDC with phase-reversal protection;
10. Using Nano sim card,support PIN code function;
11. Provide PCBA or waterproof enclosure,can be used outside.

Spesifications :
DC Power supply 7-24VDC
Power consumption : Low power consumption mode Standby:<230uA;
Normal mode:10mA~30mA,Max:230-360mA.
Communication :Optional:GSM/GPRS/3G/4G/NB-IoT/Ethernet/LoRa
Protocols :Modbus RTU Over TCP, MQTT
SIM interface :Nano
Cellular Antenna :SMA Antenna interface, 50 Ohm
Serial Interfaces :Micro USB Port;
Digital output :OC output,1A 30V DC
Digital Input :NO or NC
Analog Inputs :0-5V or 4-20mA
Temp.&Hum Inputs
AM2301:Temperature range: -40°C to +80°C, Humidity Range: 0~100%RH
Temperature Input :DS18B20:Temperature range: -55°C to +125°C,±3% RH
Temperature range :-10-+60 °C
Humidity range :Relative humidity 95% (condensation free)

Weight 500 g

The Wireless DIN IoT Module is a wireless Internet of things gateway, designed for converting digital(NC/NO) signal to Wireless communcation over SMS/GPRS/3G/4G/NB-IoT Cellular Network, and connect to the IoT Cloud Platform.
The Wireless DIN IoT Module suitable for water level sensor, smoke detector, door contact, motion sensor,and other digital output sensor,etc.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Wireless Digital Input IoT Module 4G Version”

This site uses Akismet to reduce spam. Learn how your comment data is processed.

There are no reviews yet.

Open chat