Water Leak Sensing Cable 40 Meter


Sensing cables detect the presence of water at any point along their length. Installed withe a locating module(A-LC1A),the cable senses water intrusion,triggers an alarm.

Rp7,920,000

Water Leak Sensing Cable 40 Meter
Model : A-LC1B /Not Locate The Leak Sensing Cable

Introduction :
Sensing cables detect the presence of water at any point along their length. Installed withe a locating module(A-LC1A),the cable senses water intrusion,triggers an alarm.

Distributed sensing
A-LC1B sensing cables provide distributed leak detection and location over a wide range of areas.The cable is available in a variety of lengths to provide as much coverage as needed.

Design flexibility
A-LC1B sensing cable is supplied with factory-installed plastic connectors that plug together. The cable is designed of a range of applications,including data center subfloors,telecommunication rooms HVAC equipment locations,pipes,electrical
vaults,storage areas,tanks,and roofs.The cable is small,lightweitht,and flexible,allowing easy installation.The smooth design allows for quick drying.

Advanced technology
The conductive-polymer technology and fluoropolymer construction make A-LC1B sensing cable mechanically strong and resistant to corrosion and abrasion.
The cable is constructed of two sensing wires, embedded in a fluoropolymer carrer rod.The alarm module constantly monitors the sensing cable for continuity.The rugged cable
construction exposes no metal,and enables the cable to be reused even in corrosive environments.

Product characteristics
Cable diameter : 0.24 in(6.0mm)nominal
Sensing wires: 2*30 AWG with jacket of conductive fluoropolymer
Carrier : Fluoropolymer
Cable weight(50 ft/15m length) : 500g
Cable color : High-visibility yellow

Technical Information :
Breaking strength : Cable only:160 Ib(72KG) .Including connectors:70 Ib(32kg)
Cut-through force : >50Ib with 0.005(>22kg with with 0.13mm) in blade;crosshead speed 0.2in/min
Abrasion resistance: >65 cycles per UL719

Performance Data
Leak size to alarm(tap water) 2 in(50mm)maximum at any piont along sensing cable ,up to 5000 ft maximum system length
Drying time : Cable dries and resets within 15 seconds fo removal from standing water

Weight 3000 kg

Product characteristics
Cable diameter : 0.24 in(6.0mm)nominal
Sensing wires: 2*30 AWG with jacket of conductive fluoropolymer
Carrier : Fluoropolymer
Cable weight(50 ft/15m length) : 500g
Cable color : High-visibility yellow

Technical Information :
Breaking strength : Cable only:160 Ib(72KG) .Including connectors:70 Ib(32kg)
Cut-through force : >50Ib with 0.005(>22kg with with 0.13mm) in blade;crosshead speed 0.2in/min
Abrasion resistance: >65 cycles per UL719

Performance Data
Leak size to alarm(tap water) 2 in(50mm)maximum at any piont along sensing cable ,up to 5000 ft maximum system length
Drying time : Cable dries and resets within 15 seconds fo removal from standing water

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Water Leak Sensing Cable 40 Meter”

This site uses Akismet to reduce spam. Learn how your comment data is processed.

There are no reviews yet.

Open chat