Intelligent Electric Meter

Availability:

10 in stock


Compare

PME100 Series intelligent power meter is a simple and reliable measurement and control devices, with data acquisition and control functions. It can be widely used in power systems, intelligent buildings, control systems, low-voltage distribution automation fields.
This product is suitable for low and high voltage systems.

PME100Series instruments provide large high-brightness LCD or LED display, and a full range of measurement functions, such as voltage, current, active power, reactive power, power factor, frequency, active power, reactive power, harmonics and other electrical parameters, can fully meet the requirements of low-or high-voltage three-phase electrical power network monitoring. It supports MODBUS RTU protocol via RS485 communications, network management groups performed on the instrument.

Rp2,800,000

10 in stock

Intelligent Electric Meter

PME100 Series intelligent power meter is a simple and reliable measurement and control devices, with data acquisition and control functions. It can be widely used in power systems, intelligent buildings, control systems, low-voltage distribution automation fields.
This product is suitable for low and high voltage systems.
PME100Series instruments provide large high-brightness LCD or LED display, and a full range of measurement functions, such as voltage, current, active power, reactive power, power factor, frequency, active power, reactive power, harmonics and other electrical parameters, can fully meet the requirements of low-or high-voltage three-phase electrical power network monitoring. It supports MODBUS RTU protocol via RS485 communications, network management groups performed on the instrument.

Weight 1 g
Dimensions 5 × 5 × 4 cm

Spesification

Accuracy class
Voltage and Current :0.2 level
electric energy and Power :0.5 level

Applicable system:
Low-voltage system :Lower than 400V(Three-phase Y type)
High-voltage system :Higher than 400V(Three-phase Y and△ type)

Data display
Current : Rated input current 1A or 5A, last 1.2 times, instantaneous current 10 times / 1 sec
Voltage : Rated input current 100V or 220A, last 1.2 times, instantaneous Voltage 2 times / 1 sec

Extended function(Reserved)
Digital Output: AC 220V ± 25%
Analog output :4 ~ 20Ma DC,Maximum 400 Ohm load power
Relay Output :AC 220V/5A,DC 30V/5A

Working power
Wide pressed :AC 85V ~ 265V;DC 80V ~ 300V
Power consumption Less than 2VA

Insulation parameters
insulation rating :2KV(The tested voltage is effective value)
insulation resistance :≥ 50MΩ

Electric magnetic features
Perturbation resistance static test:IEC 61000-4-2,Level 3
Radiation immunity test:IEC 61000-4-3,Level 3
Perturbation resistance electrical transient burst:IEC 61000-4-4,Level 3
Surge immunity test:IEC 61000-4-5,Level 3
Conduction rf interference test: EN 55022,Class B
Radiation radio frequency interference test :EN 55022,Class B

Working condition
Environment temperature: -20℃~+70℃
Storage temperature :-30℃~+80℃
Relative humidity :5%~95%
Demission :
Disk hole size :90mm x 90mm,67 mm x67 mm
Instrument panel size :96mm x 96mm,72 m

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Intelligent Electric Meter”

This site uses Akismet to reduce spam. Learn how your comment data is processed.

There are no reviews yet.