Industrial pure water dissolved DOG-208F
Dissolved oxygen electrode characteristics :
1. DOG-208F type dissolved oxygen electrode applies polarographic principle
2. Use platinum (Pt) as the cathode and Ag/AgCl as the anode
3. The electrolyte is 0.1M potassium chloride (KCl)
4. Use the silicone rubber permeable membrane imported from the United States as the permeable membrane
5. It has silicone rubber and steel gauze
6. Collision resistance, corrosion resistance, high temperature resistance, non-deformation performance
Model : DOG-208F
Dissolved oxygen electrode characteristics :
1. DOG-208F type dissolved oxygen electrode applies polarographic principle
2. Use platinum (Pt) as the cathode and Ag/AgCl as the anode
3. The electrolyte is 0.1M potassium chloride (KCl)
4. Use the silicone rubber permeable membrane imported from the United States as the permeable membrane
5. It has silicone rubber and steel gauze
6. Collision resistance, corrosion resistance, high temperature resistance, non-deformation performance
Technical indicators :
Measuring range: 0-100ug/L; 0-20mg/L
Electrode material: 316 stainless steel
Temperature compensation resistance: NTC: 2.252K, Pt100, Pt1000, etc.
Sensor life: >3 years
Cable length: standard 5m (double shield)
Lower limit of detection: 0.1 Āµg/L (ppb) (20Ā°C)
Measurement upper limit: 20 mg/L (ppm)
Response time: ā¤3min (90%, 20ā)
Polarization time: >8h
Minimum flow rate: 5cm/s; 515L/h
Drift: <3%/month
Measurement error: <Ā±1ppb
Output current: 20-25nA/0.01 mg/L Note: Maximum current 20-25uA
Polarization voltage: 0.7V
Zero Oxygen: <5ppb(60min)
Calibration interval: >60 days
Measured temperature: 0-60ā
Application range :
It is used in places with trace oxygen content such as thermal power plants, power plants, demineralized water, boiler feed water, etc.
Based on 0 reviews
Be the first to review “Industrial pure water dissolved DOG-208F”
You must be logged in to post a review.
Related products
-
Water Quality Sensors
PH&ORP Online Analyzer pHG-2091AX
PHG-2091AX industrial PH meter developed by our company. 2091 series intelligent online chemical analyzers strong environmental adaptability ćclear displayćSimple operation and excellent test performance make it very high cost performance and can accurately measure the solution pH and temperature of Can be widely used in thermal power, chemical fertilizer , metallurgy, environmental protection, pharmaceutical, biochemical, food and tap water solutions in pH the continuous monitoring .
SKU: PHG-2091AX -
Water Quality Sensors
Water Quality Monitoring System PWQ-2000
Pengenalan
Sistem pemantauan kualitas air PWQ-2000 adalah sistem yang mengintegrasikan sensor pemantauan kualitas air jaringan pipa, unit pemrosesan data, dan unit pipa aliran air internal.
Itu dapat terus mengukur suhu, PH, kekeruhan, indikator desinfektan, dan dapat memperluas parameter kualitas air seperti konduktivitas dan ORP.
Indeks desinfektan mengadopsi metode kolorimetri DPD.
Dua indeks desinfektan residu klorin, dan klorin total bersifat opsional.
Kuvet memiliki fungsi pembersihan otomatis, yang sangat mengurangi jumlah perawatan dan meningkatkan stabilitas data pengukuran. Perlu membeli reagen secara lokal.
Kekeruhan mengadopsi teknologi cahaya tersebar 90 Ā° dari prinsip EPA, mengadopsi sumber cahaya LED, konsumsi daya rendah dan umur panjang sumber cahaya.Aplikasi
Pemantauan kualitas air dari saluran air dan jaringan pasokan air.
Deteksi baku mutu air untuk penyediaan air sekunder di masyarakat.
Pemantauan kualitas air real-time dari kolam renang, SPA, dll, pemantauan kualitas air keran pedesaan.SKU: PWQ-2000 -
Water Quality Sensors
Conductivity meter SUP-TDS210-B
SUP-TDS210-B conductivity meter with different electrodes can be well adapted to on-site measurement.
Whether it is common tap water, boiler feed water, pure water, ultra-pure water, industrial water, sewage, etc.Features
-Using (4 ~ 20mA) is transmission output isolation, less affected by interference.
-Using isolated RS485 communication, via Modbus-RTU protocol can be easily linked into a computer.
-With configuration temperature manual and automatic compensation functions.
-Has the function of setting high and low alarms and hysteresis.
-It has the function of setting buzzer and LCD backlight switch.
-Has the function of setting high and low alarms and hysteresis.
-It has the function of setting buzzer and LCD backlight switch.SKU: SUP-TDS210-B -
Water Quality Sensors
pH glass electrode SUP-PH-5022
The PH glass electrode adopts the DOKA structure, which can block the substances that are easy to poison the electrode, such as the medium containing sulfide, amine, chromate or other metal ions. The newly developed polymer solid electrolyte is used, and the temperature is stable to 135Ā°C. Has the characteristics of non-toxic, physiological safety, aging resistance, low potential drift, stable measurement and so on.
SUP-PH5022 is suitable for measuring the quality of heavily polluted water, and is widely used in the chemical industry, industrial sewage, electroplating sewage, power plants and waste incinerators, sugar industry, printing and dyeing and other industries.Features
Fully upgrade the sealing ring/PTFE diaphragm and glass structure of the PH electrode to prevent pollution.SKU: SUP-PH-5022
There are no reviews yet.