Industrial composite pure water PH8022

Basic characteristics of PH pure water electrode
1. Filled with high molecular polymer, the reference junction potential is very stable.
2. The diffusion potential is very stable. Since the large-area diaphragm is distributed around the glass membrane bubble, the distance from the reference membrane to the glass membrane bubble is constant and close, and the ions diffused from the membrane quickly form a complete measurement with the glass electrode. The loop responds quickly, so that the diffusion potential is not easily affected by the external flow rate, etc., so it is very stable.
3. Since the diaphragm is filled with high molecular polymer, the outflow of electrolyte is small and stable, and will not pollute the pure water to be measured.
Therefore, the above characteristics of the composite electrode make it very suitable for measuring the pH value of high-purity water!
Model : PH8022
Measuring range: 0-14pH
Temperature range: 0-85℃
Pressure resistance: 0.6MPa
Slope: ≥96%
Zero point potential: 7PH±0.3
Internal resistance: MΩ(25℃)＜50MΩ
Inner type: three composite electrodes (temperature compensation and solution grounding)
Installation size: upper and lower 3/4NPT pipe thread
Connection method: low noise cable directly out.

PH electrode features :
-Adopt international advanced solid dielectric and large area PTFE liquid junction. Not easy to block, easy to maintain
-The long-distance reference diffusion path greatly prolongs the service life of the electrode in harsh environments
-The newly designed glass bulb increases the bulb area, prevents the generation of interference bubbles in the inner buffer, and makes the measurement more reliable
-Using PPS/PC shell, upper and lower 3/4NPT pipe thread, easy installation, no need for sheath, saving installation cost
-The electrode adopts high-quality low-noise cable, which can make the signal output longer than 20 meters without interference
-The electrode is made of ultra-bottom impedance-sensitive glass membrane. It has the characteristics of fast response, accurate measurement, good stability and not easy to hydrolyze in the case of low conductivity and high purity water.
-High measurement accuracy, fast response and good repeatability
-Ag/AgCL reference electrode with silver ions
-Proper operation and long service life
-Can be installed sideways or vertically in reaction tanks or pipes
-The electrodes can be used interchangeably with foreign similar electrodes

Scope of application :
Measurement of pure water and high-purity water in pharmaceuticals, chlor-alkali chemicals, pigments and dyes, pulp and paper, intermediates, fertilizers, starch, environmental protection and other industries.