Ethernet Remote IO Module M160T


Ethernet Remote IO Module M160T (8DIN+8AIN+8DO,High speed pulse counter,pulse output) is adalah Modul I / O Remote Ethernet M160T menyediakan 8 input digital terisolasi optik, mendukung maks. Penghitung pulsa kecepatan tinggi 10Mhz, 8 input analog 12 bit terisolasi, mendukung 0 ~ 5V, 0 ~ 10V, 4 ~ 20mA, sinyal analog 0 ~ 20mA, 8 output digital.

Rp3,990,000

Ethernet Remote IO Module M160T (8DIN+8AIN+8DO,High speed pulse counter,pulse output) is adalah Modul I / O Remote Ethernet M160T menyediakan 8 input digital terisolasi optik, mendukung maks. Penghitung pulsa kecepatan tinggi 10Mhz, 8 input analog 12 bit terisolasi, mendukung 0 ~ 5V, 0 ~ 10V, 4 ~ 20mA, sinyal analog 0 ~ 20mA, 8 output digital.

Spesification :
Ethernet Remote I/O Module Specifications

Digital Input
Sensor Type : Wet Contact (NPN or PNP), Dry Contact
I/O Mode : DI or Event Counter
Dry Contact : On: short to GND=1;Off: open=0
Wet Contact (DI to COM) : On: 10 to 30 VDC=1;Off: 0 to 3 VDC=0
Counter Frequency : Max. 700kHz(Only the 1st Channel can be used as high speed pulse counter)
Digital sampling frequency : 500Hz
Digital filtering strategy : Continues 3 times
Isolation : Optical Isolated,3k VDC or 2k Vrms

Digital Output
Type : Sink
I/O Mode : DO or Pulse Output
Pulse Output Frequency : 10Hz~300KHz(Only the 1st Channel can be used as high speed pulse outputs)
Over-Voltage Protection : 50 VDC
Over-Temperature Shutdown : 175°C (typical), 150°C (min.)
Load Current : Max. 500 mA per channel
Digital sampling frequency : 500Hz

Analog Input
Type : Differential input
Resolution : 12 bits
I/O Mode: Voltage / Current (jumper selectable)
Input Range : 0 to 10 VDC, 0 to 20 mA, 4 to 20 mA, 4 to 20 mA
Accuracy : ±0.1% FSR @ 25°C;±0.3% FSR @ -10 and 60°C;±0.5% FSR @ -40 and 75°C
Sampling frequency: 20Hz
Built-in Resistor for Current Input : 162 ohms
Isolation : Electrical isolation

Working Power Requirements
Input Voltage : 12~36 VDC, Peak Voltage:+40VDC, Power consumption: Less than 3W;
Input Current : 139 mA @ 24 VDC

Power Output
Output Voltage : 12~36 VDC
Output Current : 139 mA @ 24 VDC

LAN
Ethernet : 10/100 Mbps, RJ45 ports
Protection : 15KV ESD Protection
Protocols : Modbus TCP, TCP/IP,MQTT,TCP Server, TCP Client
Max. TCP Connection : 5

Weight 1000 kg

Ethernet Remote I/O Module Specifications

Digital Input
Sensor Type : Wet Contact (NPN or PNP), Dry Contact
I/O Mode : DI or Event Counter
Dry Contact : On: short to GND=1;Off: open=0
Wet Contact (DI to COM) : On: 10 to 30 VDC=1;Off: 0 to 3 VDC=0
Counter Frequency : Max. 700kHz(Only the 1st Channel can be used as high speed pulse counter)
Digital sampling frequency : 500Hz
Digital filtering strategy : Continues 3 times
Isolation : Optical Isolated,3k VDC or 2k Vrms

Digital Output
Type : Sink
I/O Mode : DO or Pulse Output
Pulse Output Frequency : 10Hz~300KHz(Only the 1st Channel can be used as high speed pulse outputs)
Over-Voltage Protection : 50 VDC
Over-Temperature Shutdown : 175°C (typical), 150°C (min.)
Load Current : Max. 500 mA per channel
Digital sampling frequency : 500Hz

Analog Input
Type : Differential input
Resolution : 12 bits
I/O Mode: Voltage / Current (jumper selectable)
Input Range : 0 to 10 VDC, 0 to 20 mA, 4 to 20 mA, 4 to 20 mA
Accuracy : ±0.1% FSR @ 25°C;±0.3% FSR @ -10 and 60°C;±0.5% FSR @ -40 and 75°C
Sampling frequency: 20Hz
Built-in Resistor for Current Input : 162 ohms
Isolation : Electrical isolation

Working Power Requirements
Input Voltage : 12~36 VDC, Peak Voltage:+40VDC, Power consumption: Less than 3W;
Input Current : 139 mA @ 24 VDC

Power Output
Output Voltage : 12~36 VDC
Output Current : 139 mA @ 24 VDC

LAN
Ethernet : 10/100 Mbps, RJ45 ports
Protection : 15KV ESD Protection
Protocols : Modbus TCP, TCP/IP,MQTT,TCP Server, TCP Client
Max. TCP Connection : 5

Serial Port
RS485 : MODBUS- RTU Protocol, Modbus-ASCII Protocol
Protection : 15KV ESD Protection
Modbus Slave address:1~255
Baud Rate : 1200,2400,4800,9600,19200,38400,57600,115200,128000Bps;
Mapping registers : Bit Type: 300 Registers, 16-Bit Type: 300 Registers.

Physical Characteristics
Wiring : I/O cable max. 14 AWG
Dimensions : 105 x 88 x 30 mm
Weight : Under 205 g
Mounting : DIN rail or wall

Environmental Limits
Operating Temperature : Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature : -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity : 5 to 95% (non-condensing)
Altitude : Up to 3000 m

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Ethernet Remote IO Module M160T”

This site uses Akismet to reduce spam. Learn how your comment data is processed.

There are no reviews yet.

Open chat