Ethernet Remote IO Module M130T

Availability:

100 in stock


Ethernet Remote IO Module M130T (8DIN+4DO,High speed pulse counter,pulse output) adalah kelas industri, desain terisolasi, keandalan tinggi, stabilitas tinggi, dan modul akuisisi data presisi tinggi, MCU Mikroprosesor Kinerja Tinggi 32-Bit tertanam, modul Ethernet adaptif 1 Industri 10 / 100M terintegrasi di dalamnya. Ini menyediakan multi I / O, mendukung Modbus TCP standar, dapat diintegrasikan ke dalam SCADA, server OPC, dan sistem otomasi lainnya. Ini dirancang untuk bekerja di lingkungan aplikasi industri yang keras, banyak digunakan dalam berbagai otomasi industri, sistem pemantauan keamanan, sistem pengukuran dan kontrol otomatis.

Rp4,177,000

100 in stock

Compare

Ethernet Remote IO Module M130T (8DIN+4DO,High speed pulse counter,pulse output) adalah kelas industri, desain terisolasi, keandalan tinggi, stabilitas tinggi, dan modul akuisisi data presisi tinggi, MCU Mikroprosesor Kinerja Tinggi 32-Bit tertanam, modul Ethernet adaptif 1 Industri 10 / 100M terintegrasi di dalamnya. Ini menyediakan multi I / O, mendukung Modbus TCP standar, dapat diintegrasikan ke dalam SCADA, server OPC, dan sistem otomasi lainnya. Ini dirancang untuk bekerja di lingkungan aplikasi industri yang keras, banyak digunakan dalam berbagai otomasi industri, sistem pemantauan keamanan, sistem pengukuran dan kontrol otomatis.

Spesification :
Ethernet Remote I/O Module Specifications

Digital Input
Sensor Type : Wet Contact (NPN or PNP), Dry Contact
I/O Mode : DI or Event Counter
Dry Contact : On: short to GND=0 ;Off: open=1
Wet Contact (DI to COM) : On: 10 to 30 VDC =1;Off: 0 to 3 VDC=0
Counter Frequency : 700khz(Only the 1st Channel can be used as high speed pulse counter)
Digital sampling frequency : 500Hz
Digital filtering strategy : Continues 3 times
Isolation : Optical Isolated,3k VDC or 2k Vrms

Digital Output
Type : Sink
I/O Mode : DO
Pulse Output Frequency : 10Hz~300KHz(Only the 1st Channel can be used as high speed pulse outputs)
Over-Voltage Protection : 50 VDC
Over-Temperature Shutdown : 175°C (typical), 150°C (min.)
Load Current : Max. 500 mA per channel
Digital sampling frequency : 500Hz

Working Power Requirements
Input Voltage : 12 to 36 VDC, Peak Voltage:+40VDC, Power consumption: Less than 3W;
Input Current : 139 mA @ 24 VDC

Power Output
Output Voltage : 12 to 36 VDC
Output Current : 139 mA @ 24 VDC

LAN
Ethernet : 10/100 Mbps, RJ45 ports
Protection : 15KV ESD Protection
Protocols : Modbus TCP, TCP/IP,TCP Server,TCP Client
Max. TCP Connection : 5

Serial Port
RS485 : MODBUS- RTU Protocol, Modbus-ASCII Protocol, Modbus Master or slave.
Protection : 15KV ESD Protection
Modbus Slave address : 1~255
Baud Rate : 1200,2400,4800,9600,19200,38400,57600,115200,128000Bps;
Mapping registers : Bit Type: 300 Registers, 16-Bit Type: 300 Registers.

Physical Characteristics
Wiring : I/O cable max. 14 AWG
Dimensions : 105 x 88 x 30 mm
Weight : Under 205 g
Mounting : DIN rail or wall

Environmental Limits
Operating Temperature : Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature : -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity :5 to 95% (non-condensing)
Altitude : Up to 3000 m

Weight1 kg

Ethernet Remote I/O Module Specifications

Digital Input
Sensor Type : Wet Contact (NPN or PNP), Dry Contact
I/O Mode : DI or Event Counter
Dry Contact : On: short to GND=0 ;Off: open=1
Wet Contact (DI to COM) : On: 10 to 30 VDC =1;Off: 0 to 3 VDC=0
Counter Frequency : 700khz(Only the 1st Channel can be used as high speed pulse counter)
Digital sampling frequency : 500Hz
Digital filtering strategy : Continues 3 times
Isolation : Optical Isolated,3k VDC or 2k Vrms

Digital Output
Type : Sink
I/O Mode : DO
Pulse Output Frequency : 10Hz~300KHz(Only the 1st Channel can be used as high speed pulse outputs)
Over-Voltage Protection : 50 VDC
Over-Temperature Shutdown : 175°C (typical), 150°C (min.)
Load Current : Max. 500 mA per channel
Digital sampling frequency : 500Hz

Working Power Requirements
Input Voltage : 12 to 36 VDC, Peak Voltage:+40VDC, Power consumption: Less than 3W;
Input Current : 139 mA @ 24 VDC

Power Output
Output Voltage : 12 to 36 VDC
Output Current : 139 mA @ 24 VDC

LAN
Ethernet : 10/100 Mbps, RJ45 ports
Protection : 15KV ESD Protection
Protocols : Modbus TCP, TCP/IP,TCP Server,TCP Client
Max. TCP Connection : 5

Serial Port
RS485 : MODBUS- RTU Protocol, Modbus-ASCII Protocol, Modbus Master or slave.
Protection : 15KV ESD Protection
Modbus Slave address : 1~255
Baud Rate : 1200,2400,4800,9600,19200,38400,57600,115200,128000Bps;
Mapping registers : Bit Type: 300 Registers, 16-Bit Type: 300 Registers.

Physical Characteristics
Wiring : I/O cable max. 14 AWG
Dimensions : 105 x 88 x 30 mm
Weight : Under 205 g
Mounting : DIN rail or wall

Environmental Limits
Operating Temperature : Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature : -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity :5 to 95% (non-condensing)
Altitude : Up to 3000 m

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Ethernet Remote IO Module M130T”

This site uses Akismet to reduce spam. Learn how your comment data is processed.

There are no reviews yet.

SHOPPING CART

close