Ethernet Remote IO Module (2DIN+2AIN+2DO)


M100T Ethernet Remote I/O Module provides 2 optical-isolated digital inputs, supports Max. 700KHz high speed pulse counter, 2 isolated 12bits analog inputs, supports 0~5V,0~10V,4~20mA,0~20mA analog signal, 2 digital outputs, supports 10Hz~300Khz high speed pulse output or relay outputs.It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system.

Rp2,890,000

Ethernet Remote IO Module (2DIN+2AIN+2DO)
Model :M100T

M100T Ethernet Remote I/O Module provides 2 optical-isolated digital inputs, supports Max. 700KHz high speed pulse counter, 2 isolated 12bits analog inputs, supports 0~5V,0~10V,4~20mA,0~20mA analog signal, 2 digital outputs, supports 10Hz~300Khz high speed pulse output or relay outputs.It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system.

Features :
1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog;
2. Wide range power supply 12 ~ 36VDC with over voltage and phase-reversal protection;
3. Management and configuration via LAN connection configuration software for easy operation and maintenance;
4. Integrated 10/100M adaptive Ethernet module, supports Modbus TCP,MQTT protocol;
5. 2 optical isolated digital input, supports Max. 700KHz high speed pulse counter;
6. 2 digital output or relay output, supports 10Hz~300KHz high speed pulse output;
7. 2 isolated analog input, 12-bit resolution, supports 0~20mA,4~20mA,0-5VDC, 0-10VDC;
8. High sampling frequency and special filtering strategy to ensure reliability;
9. 1 RS485 Serial port, supports Modbus RTU Master and slave, can extend I/O modules;
10. Supports register mapping function and extend I/O inquiry strategy;
11. Provides 1 channel 12~36VDC power source output for external device, saving wiring cost;
12. LED instructions work status, with reset button to reset, easy on-site installation and commissioning;
13. Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field;
14. Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.

Spesification :
Ethernet Remote I/O Module Specifications

Digital Input
Sensor Type Wet Contact (NPN or PNP), Dry Contact
I/O Mode DI or Event Counter

Dry Contact
On: short to GND=0
Off: open=1

Wet Contact (DI to COM)
On: 10 to 30 VDC =1
Off: 0 to 3 VDC=0

Counter Frequency :700khz(Only the 1st Channel can be used as high speed pulse counter)
Digital sampling frequency :500Hz
Digital filtering strategy :Continues 3 times
Isolation Optical Isolated,3k VDC or 2k Vrms

Digital Output

TypeSink
I/O Mode DO
Pulse Output Frequency 10Hz~300KHz(Only the 1st Channel can be used as high speed pulse outputs)
Over-Voltage Protection :50 VDC
Over-Temperature Shutdown :175°C (typical), 150°C (min.)
Load Current
Max. 500 mA per channel
Digital sampling frequency :500Hz

Analog Input
Type Differential input
Resolution 12 bits
I/O Mode Voltage / Current (jumper selectable)
Input Range
0 to 10 VDC, 0 to 20 mA, 4 to 20 mA, 4 to 20 mA

Accuracy
±0.1% FSR @ 25°C
±0.3% FSR @ -10 and 60°C
±0.5% FSR @ -40 and 75°C

Sampling frequency 20Hz
Isolation :Electrical isolation

Working Power Requirements
Input Voltage 12 to 36 VDC, Peak Voltage:+40VDC, Power consumption: Less than 3W;
Input Current 139 mA @ 24 VDC

Power Output
Output Voltage :12 to 36 VDC
Output Current 139 mA @ 24 VDC
LAN :Ethernet
10/100 Mbps, RJ45 ports
Protection 15KV ESD Protection
Protocols
Modbus TCP, TCP/IP,TCP Server,TCP Client
Max. TCP Connection 5

Serial Port RS485
MODBUS- RTU Protocol, Modbus-ASCII Protocol, Modbus Master or slave.
Protection 15KV ESD Protection
Modbus Slave address :1~255
Baud Rate :1200,2400,4800,9600,19200,38400,57600,115200,128000Bps;
Mapping registers Bit Type: 300 Registers, 16-Bit Type: 300 Registers.

Physical Characteristics
Wiring :I/O cable max. 14 AWG

Dimensions 105 x 88 x 30 mm

Weight Under 205 g
Mounting DIN rail or wall
Environmental Limits

Operating Temperature
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Altitude :Up to 3000 m

Weight 1000 g

Spesification :
Ethernet Remote I/O Module Specifications

Digital Input
Sensor Type Wet Contact (NPN or PNP), Dry Contact
I/O Mode DI or Event Counter

Dry Contact
On: short to GND=0
Off: open=1

Wet Contact (DI to COM)
On: 10 to 30 VDC =1
Off: 0 to 3 VDC=0

Counter Frequency :700khz(Only the 1st Channel can be used as high speed pulse counter)
Digital sampling frequency :500Hz
Digital filtering strategy :Continues 3 times
Isolation Optical Isolated,3k VDC or 2k Vrms

Digital Output

TypeSink
I/O Mode DO
Pulse Output Frequency 10Hz~300KHz(Only the 1st Channel can be used as high speed pulse outputs)
Over-Voltage Protection :50 VDC
Over-Temperature Shutdown :175°C (typical), 150°C (min.)
Load Current
Max. 500 mA per channel
Digital sampling frequency :500Hz

Analog Input
Type Differential input
Resolution 12 bits
I/O Mode Voltage / Current (jumper selectable)
Input Range
0 to 10 VDC, 0 to 20 mA, 4 to 20 mA, 4 to 20 mA

Accuracy
±0.1% FSR @ 25°C
±0.3% FSR @ -10 and 60°C
±0.5% FSR @ -40 and 75°C

Sampling frequency 20Hz
Isolation :Electrical isolation

Working Power Requirements
Input Voltage 12 to 36 VDC, Peak Voltage:+40VDC, Power consumption: Less than 3W;
Input Current 139 mA @ 24 VDC

Power Output
Output Voltage :12 to 36 VDC
Output Current 139 mA @ 24 VDC
LAN :Ethernet
10/100 Mbps, RJ45 ports
Protection 15KV ESD Protection
Protocols
Modbus TCP, TCP/IP,TCP Server,TCP Client
Max. TCP Connection 5

Serial Port RS485
MODBUS- RTU Protocol, Modbus-ASCII Protocol, Modbus Master or slave.
Protection 15KV ESD Protection
Modbus Slave address :1~255
Baud Rate :1200,2400,4800,9600,19200,38400,57600,115200,128000Bps;
Mapping registers Bit Type: 300 Registers, 16-Bit Type: 300 Registers.

Physical Characteristics
Wiring :I/O cable max. 14 AWG

Dimensions 105 x 88 x 30 mm

Weight Under 205 g
Mounting DIN rail or wall
Environmental Limits

Operating Temperature
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Altitude :Up to 3000 m

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Ethernet Remote IO Module (2DIN+2AIN+2DO)”

This site uses Akismet to reduce spam. Learn how your comment data is processed.

There are no reviews yet.

Open chat