Acid and Alkali Leak Sensor Cable 15 Meter


Acid and Alkali Leak Sensor Cable 15 Meter
Model :A-LLW3000/ Acid and Alkali Leak Sensor Cable

Product Introduction

Unique construction :
Four wires are embedded into a fluoropolymer core. The red and yellow wires are low resistance, insulated wires. The two black wires have a resistance that is precisely regulated in the manufacturing process.

Characteristic :
The cable is a small, flexible but rugged cable, chemically resistant and extremely resistant to corrosion and abrasion.

Liquid detection :
The induction cable is mainly used for the detection of trichloroethylene, formic acid, sulfuric acid, caustic soda, hydrochloric acid, aqua and other chemical liquids

Rp14,280,000

Acid and Alkali Leak Sensor Cable 15 Meter
Model :A-LLW3000/ Acid and Alkali Leak Sensor Cable

Product Introduction

Unique construction :
Four wires are embedded into a fluoropolymer core. The red and yellow wires are low resistance, insulated wires. The two black wires have a resistance that is precisely regulated in the manufacturing process.

Characteristic :
The cable is a small, flexible but rugged cable, chemically resistant and extremely resistant to corrosion and abrasion.

Liquid detection :
The induction cable is mainly used for the detection of trichloroethylene, formic acid, sulfuric acid, caustic soda, hydrochloric acid, aqua and other chemical liquids

Product Parameter
Cable diameter : 0.21 in (6.0mm) nominal
Continuity and signal wires : 2*26 AWG with insulation of fluoropolymer
Sensing wires : 2*30 AWG with jacket of conductive fluoropolymer
Carrier: Fluoropolymer
Cable length weight(50ft/15m ) : 2.3lb(1kg)
Cable color: High-visibility red
Maximum continuous operating temperature : 70 degree

Product details and application
Two black wires
The two black wires have a resistance that is precisely regulated in the manufacturing process.The black on the sensing wires is a conductive polymer(not insulation).

Need work with liquid leak detector
This Acid and Alkali leak sensing cable can be used to connect all our water leak detection controllers.

Application place :
This cable is widely used for floor surface installation, ground floor, equipment area, pipeline, storage tank and groove leakage detection
It is mostly used in chemical plants to detect leaks of chemical liquids, such as acidic and alkaline liquids.
It can work with either non-location water leak controller A-LC1A or location water leak controller A-LLM1

Product Parameter
Cable diameter : 0.21 in (6.0mm) nominal
Continuity and signal wires : 2*26 AWG with insulation of fluoropolymer
Sensing wires : 2*30 AWG with jacket of conductive fluoropolymer
Carrier: Fluoropolymer
Cable length weight(50ft/15m ) : 2.3lb(1kg)
Cable color: High-visibility red
Maximum continuous operating temperature : 70 degree

Product details and application
Two black wires
The two black wires have a resistance that is precisely regulated in the manufacturing process.The black on the sensing wires is a conductive polymer(not insulation).

Need work with liquid leak detector
This Acid and Alkali leak sensing cable can be used to connect all our water leak detection controllers.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Acid and Alkali Leak Sensor Cable 15 Meter”

This site uses Akismet to reduce spam. Learn how your comment data is processed.

There are no reviews yet.

Open chat